STUSB4500LQTR: An In-Depth Guide to Power Delivery
The STUSB4500LQTR is a highly efficient, synchronous buck-boost controller that can deliver up to 5A of continuous output current. It is ideal for a wide range of applications, including smartphones, tablets, and other portable devices.
Features and Benefits of the STUSB4500LQTR
- High efficiency: Up to 95% efficiency at full load
- Wide input voltage range: 3.5V to 36V
- Wide output voltage range: 0.8V to 22V
- Continuous output current: Up to 5A
- Small footprint: 3mm x 3mm QFN package
- Low noise: Typically less than 10µVrms
Applications for the STUSB4500LQTR
The STUSB4500LQTR is ideal for a wide range of applications, including:
- Smartphones
- Tablets
- Other portable devices
- Power banks
- USB-C chargers
How to Use the STUSB4500LQTR
The STUSB4500LQTR is a powerful and versatile device, but it is also easy to use. The following steps will help you get started:
-
Choose the right input voltage. The STUSB4500LQTR can operate with an input voltage range of 3.5V to 36V. However, the efficiency of the device will be highest at higher input voltages.
-
Choose the right output voltage. The STUSB4500LQTR can generate an output voltage range of 0.8V to 22V. The output voltage is set by a resistor divider network.
-
Connect the STUSB4500LQTR to your load. The STUSB4500LQTR can deliver up to 5A of continuous output current. Make sure that your load can handle this current.
-
Test your design. Once you have connected the STUSB4500LQTR to your load, test your design to make sure that it is working properly.
Tips and Tricks for Using the STUSB4500LQTR
Here are a few tips and tricks to help you get the most out of the STUSB4500LQTR:
- Use a high-quality input capacitor. The input capacitor will help to filter out noise and ripple from the input voltage.
- Use a low-ESR output capacitor. The output capacitor will help to maintain a stable output voltage.
- Place the STUSB4500LQTR close to your load. This will help to minimize the length of the traces and reduce noise.
- Use a heat sink if necessary. The STUSB4500LQTR can generate a significant amount of heat when operating at high power levels.
Common Mistakes to Avoid
Here are a few common mistakes to avoid when using the STUSB4500LQTR:
- Do not exceed the maximum input voltage. The STUSB4500LQTR can be damaged if the input voltage exceeds 36V.
- Do not exceed the maximum output current. The STUSB4500LQTR can be damaged if the output current exceeds 5A.
- Do not short the output. Shorting the output can damage the STUSB4500LQTR.
Call to Action
The STUSB4500LQTR is a powerful and versatile device that can be used in a wide range of applications. If you are looking for a high-efficiency, synchronous buck-boost controller, the STUSB4500LQTR is a great option.
Stories and Lessons Learned
Here are a few stories and lessons learned from using the STUSB4500LQTR:
-
Story 1: A customer was using the STUSB4500LQTR to power a high-power LED array. The customer was initially experiencing problems with noise and ripple on the output voltage. The problem was solved by using a high-quality input capacitor and a low-ESR output capacitor.
-
Story 2: A customer was using the STUSB4500LQTR to power a portable device. The customer was initially experiencing problems with the device overheating. The problem was solved by using a heat sink to dissipate the heat generated by the STUSB4500LQTR.
-
Story 3: A customer was using the STUSB4500LQTR to power a USB-C charger. The customer was initially experiencing problems with the charger not being able to deliver the required power. The problem was solved by using a higher input voltage.
Tables
Feature |
Value |
Input voltage range |
3.5V to 36V |
Output voltage range |
0.8V to 22V |
Continuous output current |
Up to 5A |
Efficiency |
Up to 95% |
Package size |
3mm x 3mm QFN |
Figures
[Image of the STUSB4500LQTR]
[Graph of the efficiency of the STUSB4500LQTR]
[Graph of the output voltage ripple of the STUSB4500LQTR]